Connector Assembly Figure 2 - JLG 400S Service And Maintenance Manual

Hide thumbs Also See for 400S:

Table of Contents

SECTION 7 - BASIC ELECTRICAL INFORMATION & SCHEMATICS

Figure 7-11. Connector Assembly Figure 2

3. After all required contacts have been inserted, the

4. Slide the wedge lock into the housing until it is flush

wedge lock must be closed to its locked position.

with the housing (See Figure 7-13.).

Release the locking latches by squeezing them inward

(See Figure 7-12.).

Figure 7-13. Connector Assembly Figure 4

Figure 7-12. Connector Assembly Figure 3

Troubleshooting