JLG 400S Service And Maintenance Manual page 53

General
All Decals/Placards Installed, Secure, Legible
Annual Machine Inspection Due
No Unauthorized Modifications or Additions
All Relevant Safety Publications Incorporated
General Structural Condition and Welds
All Fasteners, Pins, Shields, and Covers
Grease and Lubricate to Specifications
Function Test of All Systems
Paint and Appearance
Stamp Inspection Date on Frame
Notify JLG of Machine Ownership
Footnotes:
1
Prior to each sale, lease, or delivery
2
In service for 3 months; Out of service for 3 months or more; Purchased used
3
Annually, no later than 13 months from the date of the prior inspection, Includes all daily and quarterly inspections, mandated by regulating body
4
Replace every 12 years or 7,000 hours
50
Indicates a 50 hour interval required to perform task after initial use of machine. This only occurs once in machine life
250
Indicates a 250 hour interval required to perform task after initial use of machine. This only occurs once in machine life
Performance Codes:
1 - Check for proper and secure: installation, adjustment, or torque
2 - Visual inspection for damage: (cracks, corrosion, abrasions, distortion, excessive wear, broken welds, gouges, chafing and threads showing)
3 - Proper operation
4 - Check for proper sealing, signs of leakage and fluid level
5 - Clean and free of debris
6 - Decals installed and legible
7 - Check for proper tolerances, routing, and lubrication
8 - Fully Charged
9 - Verify/Perform
3121671
Table 2-3. Inspection and Preventive Maintenance Schedule
AREA
Inspections
1 2
Pre-Delivery or Frequent
(Quarterly)
Inspection
9
9
9
2
1, 2
9
9
5
SECTION 2 - GENERAL
3
Annual
(Yearly)
Inspection
9
9
9
9
2
1, 2
9
9
5
9
9
2-9