JLG 400S Service And Maintenance Manual page 298

Hide thumbs Also See for 400S:

Table of Contents

SECTION 4 - BOOM & PLATFORM

3. Install new 8-32 x 0.500 self threading screw on other

side. Torque to 18-20 in. lbs. (2-2.25 Nm).

NOTE: When tightening screws make sure screw head is seated

against link with no space in between link and underside of

REPLACE FIXED END BRACKETS

REPOSITION CABLES/HOSES AND KEEP COVERED DURING GRINDING TO PRE-

VENT DAMAGE.

1. Remove rivets as shown in link removal instructions on

Troubleshooting