Assembly Instructions For Flange Connections: (Fl61 And Fl62) - JLG 400S Service And Maintenance Manual

Assembly Instructions for Flange Connections:
(FL61 and FL62)
1. Make sure sealing surfaces are free of rust, splits,
scratches, dirt, foreign matter or burrs.
2. Install o-ring as per "O-ring Installation (Replacement)" .
3. Pre-lubricate the o-ring with Hydraulic Oil.
4. Position flange and clamp halves.
5. Place lock washers on bolt and bolt through clamp
halves.
6. Tighten all bolts by hand.
7. Torque bolts in diagonal sequence in two or more incre-
ments to the torque listed on Table 5-31and Table 5-32.
3121671
SECTION 5 - BASIC HYDRAULICS INFORMATION & SCHEMATICS
5-43