Platform/Support Installation - JLG 400S Service And Maintenance Manual

SECTION 4 - BOOM & PLATFORM

Platform/Support Installation

NOTE: The platform support weighs approximately 132 lbs.
(60 kg).
1. Using a suitable device, support the platform support
and position it on the rotator.
2. Install the rotator center bolt and locknut.
3. Apply JLG Threadlocker P/N 0100011 to the eight bolts
securing the support to the rotator and install the bolts.
4. Torque the nut on the rotator center bolt and the retain-
ing bolts. See Figure 4-8. and Figure 4-9.
NOTE: The platform weighs approximately 176 lbs. (80 kg).
4-10
5. Position the platform on the platform support and
6. Connect the electrical harness to the platform control
MAF06370
MAF06360
install the bolts securing the platform to the platform
support. See Figure 4-8. and Figure 4-9.
console.
MAF06350
3121671