JLG 400S Service And Maintenance Manual page 463

Table 6-2. Machine Configuration Programming Information (Software Version P2.10)
Configuration
Number
Label/Digit
GROUND ALARM: 1
18*
2
3
4
DRIVE TYPE: 1
19*
2
* Only visible under certain model selections.
DISPLAY UNITS: 1
20*
2
* Certain market selections will alter default setting.
CLEARSKY: 1
21
2
* Only visible under certain model selections.
CRIBBING OPTION: 1
22
2
* Only visible under certain model selections.
* Only visible under certain market selections.
ALERT BEACON: 1
23
2
TEMP CUTOUT: 1
24
2
* Only visible under certain market selections.
PLAT LVL OVR CUT: 1
25
2
ALARM / HORN: 1
26
2
3121671
NO: No ground alarm installed.
DRIVE: Travel alarm sounds when the drive function is active.
DESCENT: Descent alarm sounds when lift down is active.
MOTION: Motion alarm sounds when any function is active.
4WD: 4 wheel drive.
2WD: 2 wheel drive.
METRIC: Celsius, Kilograms, KiloPascal.
IMPERIAL: Fahrenheit, Pounds, Pounds/in
NO: ClearSky (telematics) options is disabled.
YES: ClearSky (telematics) option is enabled.
NO: Cribbing Option is disabled.
YES: Cribbing Option is enabled.
OFF FOR CREEP
IN CREEP 20FPM
NO: No Low Temp Cutout system installed.
YES: Low Temp Cutout system installed.
NO: Platform Level functions above elevation.
YES: Platform Level does not function above elevation.
SEPARATE: Ambient alarm installed.
COMBINED: Single Horn / Alarm installed.
SECTION 6 - JLG CONTROL SYSTEM
Description
2
.
Default
Number
4
1
2
1
1
1
1
1
2
6-23