Powertrack Maintenance - JLG 400S Service And Maintenance Manual

Hide thumbs Also See for 400S:

Table of Contents

SECTION 4 - BOOM & PLATFORM

Powertrack Maintenance

NOTE: Hoses shown in powertrack are for example only. Actual

hose and cable arrangements are different.

1. Clamp bar and poly roller tightly so they do not spin

when removing screw. With a small 1/4 in. ratchet and a

T-20 torx bit, remove 8-32 x 0.500 screw from one side.

2. Repeat step 1 and remove screw from other side of

track. Remove bar/poly roller from powertrack.