Tires; Hydraulic Oil - JLG 400S Service And Maintenance Manual

Table 1-7. Kubota WG 2503
Fuel
No. of Cylinders
BHP
Gasoline
LP
Bore
Stroke
Displacement
Engine Oil Capacity
Engine Coolant Capacity
Starter Rating
Alternator Rating
Min. Low RPM
Max. High RPM
Max. Rated Torque
Gasoline
LP
Average Fuel Consumption

1.4 TIRES

Table 1-8. Tires
Size Type
12 x 16.5 Pneumatic
Foam-Filled
14 x 17.5 Pneumatic
Foam-Filled
33/16LL x 16.1 Pneumatic
315/55 D20 Foam-Filled
Solid
3121671
Gasoline or Gasoline/LP Gas
45.5 kW @2700 rpm
46 kW @2700 rpm
3.46 in (88 mm)
4.03 in (102.4 mm)
153 cu. in (2.5L)
2.5 gal. (9.5 L)
1.4 gal. (5.4L)
12 V. 2.0 kW
12 V. 40 Amp
700
2700
126 lb. ft(171Nm) @ 1800rpm
131 lb. ft(178 Nm) @ 1400rpm
0.935 gph (3.544 Lph)
Pressure Weight
90 psi (6 Bar) 128 lbs. (58 kg)
N/A 328 lbs. (149 kg)
90 psi (6 Bar) 170 lbs. (77.2 kg)
N/A 440 lbs. (200 kg)
40 psi (3 Bar) 119.5 lbs. (54 kg)
N/A 286 lbs. (130 kg)
N/A 286 lbs. (130 kg)

1.5 HYDRAULIC OIL

Hydraulic System
4
Operating Temperature Range
+0° to + 180° F (-18° to +83° C)
+0° to + 210° F (-18° to +99° C)
+50° to + 210° F (+10° to +99° C)
NOTE: Hydraulic oils must have anti-wear qualities at least to API
Service Classification GL-3, and sufficient chemical stabil-
ity for mobile hydraulic system service. JLG Ind. recom-
mends Mobilfluid 424 hydraulic oil, which has an SAE
viscosity index of 152.
NOTE: When temperatures remain consistently below 20° F
(-7° C), JLG Industries recommends the use of
Mobil DTE-13.
NOTE: Machines may be equipped with Mobil EAL224H biode-
gradable and non-toxic hydraulic oil. This is Vegetable oil
based and possesses the same antiwear and rust protec-
tion characteristics as mineral oils, but will not adversely
affect the ground water or the environment when spilled or
leaked in small amounts. Mobil EAL224H has a viscosity of
34 cSt at 40° C. and viscosity index of 213. The operating
temperature range of this oil is -18° C to +83° C.
Table 1-10. Mobilfluid 424 Specs
SAE Grade
ISO Viscosity Grade
Gravity, API
Density, Lb/Gal. 60°F
Pour Point, Max
Flash Point, Min.
Brookfield, cP at -18°C
at 40° C
at 100° C
Viscosity Index
SECTION 1 - SPECIFICATIONS
Table 1-9. Hydraulic Oil
S.A.E. Viscosity
Grade
10W
10W-20, 10W-30
20W-20
10W30
55
29.0
7.35
-46°F (-43°C)
442°F (228°C)
Viscosity
2700
55 cSt
9.3 cSt
152
1-3