4.14 Powertrack Maintenance; Remove Link - JLG T500J Service And Maintenance Manual

SECTION 4 - BOOM & PLATFORM

4.14 POWERTRACK MAINTENANCE

Remove Link

NOTE: Hoses shown in powertrack are for example only. Actual
hose and cable arrangements are different.
1. Clamp bar and poly roller tightly so they do not spin
when removing screw. With a small ¼" ratchet and a 
T-20 Torx bit, remove 8-32 x 0.500 screw from one side.
4-18
2. Repeat step 1 and remove screw from other side of
track. Remove bar/poly roller from powertrack.
REPOSITION CABLES/HOSES. KEEP COVERED DURING GRINDING TO PREVENT
DAMAGE.
3121200