Display Unit - Omron EQUO Series User Manual

2.2

Display Unit

Display
*1
*1 Not displayed on ZN-KMX21.
Refer to the Appendix for the definitions of alphabetical, numeric and principal message displays.
Refer to: Appendix, "Character Display List"
Indicator Definition
Definition/Function (When Displayed)
An Integral power consumption reset interval is set.
The setting is OFF when this is not displayed.
Communication via LAN cable is in process.
A LAN cable is connected and network communication is ready.
Data is being recorded in the internal memory.
Blinking: The timer is set for the unit to wait for recording start.
An SD memory card is inserted.
Blinking: The SD memory card is being accessed.
Integral power consumption has exceeded the specified upper threshold
value.
Power is being supplied to the unit.
The battery level is shown in 4 levels. Replace the batteries when this is
blinking.
This indication is not available when the measurement mode (MODE) is in
NORM or HISPD.
Indicates the upper limit threshold value.
Indicates the maximum momentary power value.
Indicates the minimum momentary power value.
Indicates the average momentary power value.
The unit is currently operating in RUN mode.
The unit is currently operating in FUN mode.
The unit is currently operating in FUN mode.
2-2
2. Part Name and Function