Setting And Operation Examples Of Dog1 And Dog2 - Mitsubishi Electric M800VS Series Connection And Set Up Manual

M800VS/M80V Series Connection and Setup Manual
25 Setting the Position Switches

25.2 Setting and Operation Examples of dog1 and dog2

25.2 Setting and Operation Examples of dog1 and dog2
Settings of dog1 and dog2
dog1 < dog2
dog1 > dog2
dog1 = dog2
[For rotary axes]
Settings of dog1 and dog2
dog1 < dog2
dog1 > dog2
dog1 ≦ 0 and
360 ≦ dog2
Positions of dog1 and dog2
dog1 dog2
dog2 dog1
dog1 = dog2
Positions of dog1 and dog2
dog2 dog1
dog1 dog2
dog1 dog2
dog1
dog2
499
Description
A signal is output when the
machine reaches between
dog1 and dog2.
A signal is output when the
machine reaches between
dog2 and dog1.
A signal is output when the
machine is at dog1 (dog2).
(Example)
A signal is output when the machine
dog1 = 30.000
reaches between dog1 and dog2.
dog2 = 330.000
(Example)
Signal is output in the same manner
dog1 = -30.000
even if dog1 is in the negative area.
dog2 = 30.000
(Example)
A signal is output when the machine
dog1 = 330.000
reaches between dog2 and dog1.
dog2 = 30.000
(Example) A signal is always output when the angle
dog1 = -30.000 of dog1 and dog2 is within a range of 0
dog2 = 390.000 to 360 degrees.
Basic machine coordinate
system zero point
Virtual
dog
PSW
dog1
range
dog2
Description
IB-1501613-A