Mounting The Unit In A Rack - Panasonic AK-HCU250P Operating Manual

Mounting the unit in a rack

Mounting the rack mount adapters
1. Remove the setting legs (A) secured to the unit.
Remove them using a Phillips screwdriver.
2. Mount the supplied rack mount adapters (B).
● Mounting screws are not supplied. Use mounting screws removed from the unit using a Phillips screwdriver.
Tighten the mounting screws for rack mount adapters using a torque of 110 N·m or more.
B
A
A. Setting legs
B. Rack mount adapters
Mounting the unit in a rack
● Use the unit securely mounted in a standard 19-type rack (depth: 600 mm [23-5/8 inches] or more) compliant with EIA or JIS
standards or equivalent.
● Securely fix the unit in place using screws that are appropriate for the rack.
● Be sure to attach a support guide for supporting (A) the rear of the unit.
(Provide a support guide that is appropriate for the rack.)
A. Support guide
Mounting positions
In the case of the EIA standard rack
76.2 mm
(3 inches)
NOTE
● Do not block the ventilation holes when installing the unit.
B
A
A
A
A
In the case of the JIS standard rack
50 mm
(1-15/16 inches)
- 13 -
Introduction