Major Operating Controls And Their Functions; I Camera Head; I Camera Control Unit (Ccu) - Panasonic GP-US932CSAE Operating Instructions Manual

Major operating controls and their functions

I Camera head

q Lens mount section
A C-mount lens is mounted on this section. ( page
14)
w Camera cable connector
The camera cable (option) is connected to this con-
nector.
<HD Camera Cable> (option)
GP-CA932/4E (4 m)
GP-CA932/6E (6 m)
GP-CA932/10E (10 m)
GP-CA932A20E (20 m)
e Tripod socket
The tripod socket hole is used when the camera head
is secured to the tripod.
The tripod socket can be mounted on either top or
bottom of the camera head.
Tripod socket hole: 1/4-20 UNC

I Camera control unit (CCU)

<Front view>
r Power switch [DC POWER]
This switch toggles the power of the CCU and cam-
era head on and off. The switch lights green while the
power is turned on.
t Scene file selection button [SCENE]
The button selects a scene file from 1 to 3. Each
scene file should be set up beforehand using the
SETUP menu. ( page 20)
Selection of a scene file turns on the green indicator
of the selected file number.
8
t
D C P O W E R
1 2 3
ON
SCENE
r
OFF
BA R
AWC
!0
Important:
• Be sure to turn off the power of the CCU before con-
necting or disconnecting the camera cable.
• Avoid bending excessively or breaking the camera
cable.
• Use the specific-camera head only.
q
y u i
o
L OW H I G H
F R E E Z E
G A I N S E L
M E N U
E X PA N D
D RANGE
!1
y Gain selection button [GAIN]
The gain is selectable from OFF, LOW, and HIGH.
Selection of a gain turns on the green indicator of the
selected gain. No indicator is turned on when the
gain is set to off.
Selectable gain varies depending on the gain setting
in the SETUP menu ( page 19).
When GAIN is set to "AUTO" and SENS UP is set
to "OFF": The gain is unchangingly set to "HIGH".
e
G P – U S 9 3 2 A
!2
C A M E R A
w