Switches; Power On/Off Slide Switch - Xilinx ZC706 User Manual

Table 1-31 lists the GPIO Header connections to XC7Z045 AP SoC U1.
Table 1-31: GPIO Header Connections to XC7Z045 AP SoC at U1
TCA6416APWR (U16) PORT: Pin
P00:4
P01:5
P02:6
P03:7
P04:8
P05:9
P06:10
P07:11
XC7Z045 AP SoC (U1) Pin
AJ21
AK21
AB21
AB16
Y20
AA20
AC18
AC19
See Zynq-7000 All Programmable SoC Technical Reference Manual (UG585) for information
about the PS PJTAG functionality.

Switches

The ZC706 evaluation board includes a power and a configuration (PL PROG_B) switch:
• Power On/Off slide switch SW1 (callout 27)
• SW10 (FPGA_PROG_B), active-Low pushbutton (callout 28)
• PS System Reset Pushbuttons

Power On/Off Slide Switch

[Figure 1-2, callout 27]
The ZC706 evaluation board power switch is SW1. Sliding the switch actuator from the Off
to On position applies 12V power from J22 a 6-pin mini-fit connector. Green LED DS22
illuminates when the ZC706 evaluation board power is on. See
details on the onboard power system.
ZC706 Evaluation Board User Guide
UG954 (v1.5) September 10, 2015
Net Name GPIO Header J57 Pin
IIC_PMOD_0 J57.1
IIC_PMOD_1 J57.3
IIC_PMOD_2 J57.5
IIC_PMOD_3 J57.7
IIC_PMOD_4 J57.2
IIC_PMOD_5 J57.4
IIC_PMOD_6 J57.6
IIC_PMOD_7 J57.8
Net Name GPIO Header J58 Pin
PMOD1_0 J58.1
PMOD1_1 J58.3
PMOD1_2 J58.5
PMOD1_3 J58.7
PMOD1_4 J58.2
PMOD1_5 J58.4
PMOD1_6 J58.6
PMOD1_7 J58.8
www.xilinx.com
Feature Descriptions
Power Management for
Send Feedback
62