Xilinx ZC706 User Manual page 109

7. The ZC706 board is taller than standard PCIe cards. Ensure that the height of the card is
free of obstructions.
8. Connect the ATX power supply to the ZC706 board using the ATX power supply adapter
cable as shown in
a. Plug the 6-pin 2 x 3 Molex connector on the adapter cable into J22 on the ZC706
board.
b. Plug the 4-pin 1 x 4 peripheral power connector from the ATX power supply into the
4-pin adapter cable connector.
9. Slide the ZC706 board power switch SW1 to the ON position. The PC can now be
powered on.
ZC706 Evaluation Board User Guide
UG954 (v1.5) September 10, 2015
Figure D-1:
www.xilinx.com
Installing the ZC706 Board in a PC Chassis
Send Feedback
109