C. When using the INOblender as a stand-alone device.
Read the INOblender Operation Manual PN 20732 before using the INOblender.
Important:
Follow instructions and obey all Warnings and Cautions.
Figure 4-1
Figure 4-2
4-6
1
2
3
Typically the INOblender receives INOMAX
from the INOmax DS
(INOMAX cylinder
IR
supplies both devices; see Figure 4-1).
As a stand-alone device the INOMAX cylinder
supplies INOMAX to the INOblender.
(see Figure 4-2).
1. Disconnect INOMAX regulator hose from
back of INOmax DS
.
IR
2. Disconnect INOblender hose from back of
INOmax DS
.
IR
3. Connect INOMAX regulator hose to
INOblender inlet hose.
Part No. 20717 Rev-01
2014-07