Manual Pre-Use Checkout - Mallinckrodt INOMAX DSir Plus Operation Manual

9/ Appendix

Manual Pre-Use Checkout

Following unpacking and prior to the first use:
Note:
• Remove any protective caps from the connectors and ports on the INOmax DS
• Ensure the INOmax DS
Connect the INOmax DS
must always be connected to an electrical outlet to maintain a full battery charge.
Part No. 20717 Rev-01
2014-07
is on a flat surface or is fixed securely to a cart or transport sled.
IR
power cord to an emergency-power-backed hospital-grade outlet. The power cord
IR
Self Test Screen
Turn ON INOmax DS .
IR
An INOmax DS splash screen will appear once
IR
the device is turned ON followed by a Mallinckrodt
test screen (confirm that the speaker sounds).
Low calibration automatically starts
Note:
following the INOmax DS
Allow the low calibration to complete
before completing the manual purge and
alarm verification.
Pressing the CANCEL button exits the Pre-Use
wizard.
.
IR
self test.
IR
9-1