Table of Contents
Advertisement
1
2
3
19
18
17
16
15
1. Alarm Silence Button
2. Upper Alarm Limit Button
3. Lower Alarm Limit Button
4. Monitored Value
5. Menu Button
6. Text Message Area
Figure 1-4 Main Display Screen
1
10
9
8
1. Pre-Use Checkout Button
2. Auto Purge Button
3. Return to Previous Level Button
4. Monitor Area
5. Alarm History Button
Figure 1-5 Menu Screen (second level)
1-8
4
5
11
10
9
14
13
12
7. Monitor Area
8. Graphical Area
9. Patient Information Button
10. Sample Line Icon
11. Water Trap Bottle Icon
12. Inspiratory Limb Icon
2
3
7
6
6. Settings Button
7. High Calibration Button
8. High Calibration Due Date
9. Low Calibration Button
10. Last Low Calibration Date
6
Main Display Screen
• On the main screen the user can
7
view alarm messages, monitored
values and graphical information.
• By pressing the "Menu Button" on
the touch screen (top right hand
corner), the user can access the
menu screen (see Figure 1-5 ).
8
13. Injector Module Icon
14. Delivery Line Icon
15. Integrated Pneumatic Backup Line Icon
16. Integrated Pneumatic Backup Switch Icon
17. Delivery Setpoint Display
18. NO Delivery Setpoint Button
19. Cylinder Icon
Menu Screen (second level)
• On the menu screen the user can
access the Pre-Use Checkout
(#1) and the Auto Purge (#2)
wizards.
Note:
4
5
• To review the complete alarm
history, press the Alarm History
button (#5), (refer to Section 5/
Alarms).
• To initiate a low (room air) or high
calibration, press either the Low
Cal (#9) or High Cal (#7) buttons.
(refer to Section 6/ Calibration).
• Press the Settings button (#6) to
view circuit flow and calculated
delivery graphs, change display
brightness, change alarm volume,
change time zone and view
software revision (see Figure 1-6).
The Pre-Use Checkout
and Auto Purge buttons
are inactive (greyed out) if
a dose is set.
Part No. 20717 Rev-01
2014-07
Advertisement
Table of Contents
