Mallinckrodt INOMAX DSir Plus Operation Manual page 123

Final Set-up Diagram
The following diagram (see Figure 4-9) and photo illustrates all of the components
connected.
Figure 4-9
Figure 4-10
Part No. 20717 Rev-01
2014-07
Communication will take place between the
INOmax DS and the INOmeter after the boot up
IR
phase of the INOmax DS
Loss of communication
WARNING:
between the INOmax DS
and the INOMAX cylinder
for more than one hour
will result in interruption of
INOMAX delivery.
• Cylinder icons are not visible and
Note:
the NO delivery setpoint button will
remain inactive until the INOmax DS
recognizes an INOMAX cylinder.
• When using the transport regulator/
cap assembly only one cylinder will be
displayed (see Figure 4-10).
is complete.
IR
IR
IR
4-15