Table of Contents
Advertisement
Display and user controls
The INOmax DS
has a color touch screen display and a control wheel for adjusting and entering user
IR
settings. The buttons on the touch screen and the control wheel perform a variety of functions using a three-
step procedure (see "Setting and making changes on the INOmax DS
The touch screen buttons and control wheel are used to:
• Set the concentration of delivered NO
• Adjust alarm limits
• Silence alarms
• Calibrate the sensors
• Review alarm history
• Define setup options
• Enter patient information
• If a button has been selected and no activity has been sensed within 20 seconds, the display will
Note:
return to its previous condition. If a button is greyed out, it is not active.
• Position delivery system so user screen is unobstructed and the speaker is not covered.
1-10
" see page 1-12).
IR
When a value is being changed, pressing the
"Cancel Active Status" button during editing will
stop the change and return the parameter to its
original value (similar to the escape key on a
computer).
Part No. 20717 Rev-01
2014-07
Advertisement
Table of Contents
