Monitoring The Environment - Mallinckrodt INOMAX DSir Plus Operation Manual

Monitoring the Environment

2
Part No. 20717 Rev-01
2014-07
1
The INOmax DS
measure the environmental levels of NO
and NO .
2
1. Disconnect the sample line connector
from the sample tee.
2. Cap the Luer fitting on the sample tee.
WARNING:
3
3. Sample the room air with the sample line
and read the NO and NO
4. After environmental monitoring, remove
the Luer fitting cap on the sample tee and
reconnect the sample line.
4
Monitoring alarms may occur during the
Note:
performance of this test.
monitoring system can
IR
Patient circuit pressure and
gas loss will result if cap is
not placed (secured).
readings.
2
3-19