Table of Contents
Advertisement
1
2
A. Side View
1. Injector Module
2. 22F inlet
3. 22M / 15F outlet
Airflow Direction
B. Top View
Figure 3-2
Part No. 20717 Rev-01
2014-07
5. On the injector module, note the airflow direction
arrow (Fig. 3-2, B).
Flow from the ventilator must pass through the
injector module in the direction of the arrow.
6. Select the dose button on the screen. On the
INOmax DS
NO dose.
7. Confirm the change by pressing the Control
wheel or dose button on the screen.
8. Set the user-adjustable alarm settings on the
3
INOmax DS
system.
Note:
, rotate the control wheel to set the
IR
and on the ventilator or breathing
IR
• After the INOmax DS
IR
to the ventilator or breathing
system the trigger sensitivity on
the ventilator may need adjustment
due to the removal of gases by the
sample system.
• The first time a dose is set from
zero, the upper and lower NO alarm
limits are set 50% above and 50%
below the set dose.
is connected
3-3
Advertisement
Table of Contents
