Table of Contents
Advertisement
Cleaning the INOmeter
• Apply cleaning agent to a cloth before application; do not spray directly on the INOmeter.
Caution:
It is important to prevent pooling and direct contact with electrical connections, which can
cause damage over time.
• Do not autoclave or gas sterilize the INOmeter.
• Be sure that the INOmax DS
• Do not saturate the INOmeter with excessive solution. Liquid may flow into the device
and damage internal components.
• Do not use organic, petroleum-based solvents, glass cleaners, acetone or other harsh
cleaning agents.
• Do not use abrasive cleaning agents (such as steel wool, silver polish or cleaner).
External surfaces and the Display
• Clean the outer surface of the INOmeter with a soft cloth dampened in a mild soap and water solution,
isopropyl alcohol (70%) or with one of the cleaning agents (see cleaning agent list above) while following
the manufacturer's recommendations.
7-4
is completely dry before using.
IR
Part No. 20717 Rev-01
2014-07
Advertisement
Table of Contents
