Inometer Operation - Mallinckrodt INOMAX DSir Plus Operation Manual

INOmeter Operation

• Removal of the INOmeter from the cylinder must be performed by authorized personnel. Do not
dispose of the INOmeter.
• INOmeter battery replacement is only to be performed by authorized personnel.
• The INOmeter replaces the standard rubberized cylinder valve handle on the INOMAX cylinders and
is used to open and close the cylinder valve. The INOmeter is a time-metric device which records the
amount of time the INOMAX cylinder valve is opened.
• The INOmeter is designed for use with INOMAX cylinders and with the INOvent, INOmax DS and
INOmax DS delivery systems.
IR
• When used with INOmax DS
INOmax DS and the INOmeter. The INOmeter communicates the INOMAX cylinder concentration
IR
and the expiration date to the INOmax DS
communicated from the INOmax DS
Figure 1-8
Figure 1-9
1-18
, two-way infrared (IR) communication occurs between the
IR
. Patient ID (when confirmed) and dose information are
IR
to the INOmeter.
IR
• Cylinders are shipped with the
Note:
INOmeter covered in a tamper-proof
seal.
• A valve lock is secured to the cylinder
by a lanyard.
• The lock must be removed to open
the cylinder valve for use.
1. Remove and properly dispose of tamper-proof
seal or covering (see Figure 1-8).
2. The lock is secured to the cylinder by a
lanyard (see Figure 1-9).
Part No. 20717 Rev-01
2014-07