Servicing The Disk Backplane (Fru); Remove The Disk Backplane - Oracle X6-2 Service Manual

Servicing the Disk Backplane (FRU)

Verify that the Power/OK status indicator is steady on.
Servicing the Disk Backplane (FRU)
Caution -
The following sections provide information to assist you when servicing the disk backplane:
Caution -
disk backplane. You must disconnect the power cables from the server before performing these
procedures.
"Remove the Disk Backplane" on page 150
■
"Install the Disk Backplane" on page 153
■
Related Information
"Disconnect Cables From the Server" on page 56
■
"Take Antistatic Measures" on page 59
■
"Extend the Server to the Maintenance Position" on page 56
■
"Open the Server Fan Door" on page 59
■

Remove the Disk Backplane

Caution -
1. Prepare the server for service.
a. Power off the server and disconnect the power cords from the power
supplies.
See
b. Extend the server to the maintenance position.
See
150 Oracle Server X6-2 Service Manual • June 2016
The disk backplane should be serviced only by authorized Oracle Services personnel.
Ensure that all power is removed from the server before removing or installing a
The disk backplane should be removed only by authorized Oracle Services personnel.
"Powering Down the Server" on page
"Extend the Server to the Maintenance Position" on page
51.
56.