Use The Oracle Ilom Cli To Power On The Server - Oracle Sun Server X4-4 Installation Manual

Use the Oracle ILOM CLI to Power On the Server

1. Confirm that the system is ready to power on by checking to see if the SP
indicator [3] is steady on.
Callout
1
2
3
2. Press the main power button [2].
The system OK indicator [1] blinks as the server enters the boot process.
"Viewing BIOS Messages" on page 133
Next Steps
Use the Oracle ILOM CLI to Power On the Server
1. Log in to the Oracle ILOM command-line interface (CLI) using an Administrator
account.
Oracle ILOM displays the default command prompt (->), indicating that you have successfully
logged in to Oracle ILOM.
2. From the CLI prompt, type the following command:
->
start /System
The main power mode is applied to the server.
"Viewing BIOS Messages" on page 133
Next Steps
132 Sun Server X4-4 Installation Guide • October 2015
Description
System OK indicator
Power button
SP OK indicator