Power On The Server (Oracle Ilom Cli); Power Off The Server (Oracle Ilom Cli) - Oracle SPARC Administration Manual

Power On the Server (Oracle ILOM CLI)

Power On the Server (Oracle ILOM CLI)
Note -
powered on. To learn about the parameters that control this action, see
Parameters" on page
Log in to Oracle ILOM.
1.
See "Log In to Oracle ILOM" on page
Note -
module.
2. At the Oracle ILOM prompt, type:
-> start /System
Are you sure you want to start /System (y/n) ? y
Starting /System
Note -
3. Switch to the host console to view host output.
-> start /HOST/console
Are you sure you want to start /HOST/console (y/n)? y
Related Information
"Power On the Server (Oracle ILOM CLI)" on page 24
■
"Reset the Server (Oracle Solaris)" on page 30
■
"Reset the Server (Oracle ILOM)" on page 30
■

Power Off the Server (Oracle ILOM CLI)

1. Log in to Oracle Solaris as a user with root privileges.
2. Shut down Oracle Solaris.
24 SPARC and Netra SPARC T5 Series Servers Administration Guide • August 2016
By default, the host automatically attempts to boot when the host is reset or
43.
If you have a modular system, ensure that you are logged in to the desired server
To skip being prompted for confirmation, use the start -script /System command.
17.
"Configuring Boot