Fundamentals
3.1
Requirements for commissioning
The following are necessary for commissioning a SINAMICS S drive system:
● A programming device (PG/PC)
● Startdrive commissioning tool
● A communication interface, e.g. PROFINET, Ethernet
● Completely wired-up drive line-up (see SINAMICS S120 manuals)
A configuration example with booksize components and PROFINET communication is
shown in the following figure:
Figure 3-1
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Component configuration (example)
3
61