Installing The Wall Rail (M3080A #A13); Installing The Tilt/Swivel Mount (M3080A #A14) - Philips M3001A Service Manual

Installing the Wall Rail (M3080A #A13)

The wall rail is intended for use with the Universal Bed Hanger (#A11). To mount the rail
securely, you need 3 screws. These are not provided because the type of surface dictates the
type of screw used.
Step 1
Step 2
Step 3
Step 4
Step 5

Installing the Tilt/Swivel Mount (M3080A #A14)

The Tilt/Swivel mount can be used in the following situations:
• Screwed directly to a wall.
• Mounted to the GCX Wall Channel #A15 (described in the following section).
• Attached to the Universal Pole Clamp.
• Attached directly to the Monitor.
Installing the Instrument
Unpack the Wall Rail and check all parts are available.
Select 3 screws (appropriate to surface material).
Insert the 3 screws through the screw holes provided in the plate.
Tighten the screws.
Hang the bed hanger over the wall rail.
Installing the Wall Rail (M3080A #A13)
Rail
101