Download  Print this page

Philips M3001A Service Manual Page 66

M3/m4 monitors,measurement server,measurement server extensions.
Hide thumbs

Advertisement

Sidestream CO
Measurement
2
N
2
Acquisition hardware revision A.01.09 or lower.
• N
rection to CO
and N
If N
it is assumed that the gas mixture consists mainly of O
tions).
• O
• Humidity Correction—This correction is selectable between Body Temperature Pressure
Saturated (BTPS) and Standard Pressure Temperature Dry (STPD). The Extension meas-
ures STPD and uses this correction formula:
• Max Hold—There are three possible selections:
50
O correction is required only on M3015A Measurement Server Extensions with CO
O Correction—This can be turned on or off. If N
2
is made. In this case, it is assumed that the gas mixture consists mainly of O
2
(respiratory intensive care unit conditions).
2
O correction is on, oxygen and N
2
Correction— There is a fixed correction of 45% O
2
BTPS = 0.94 x STPD
Off—The ETCO
and IMCO2 numerics display the breath-to-breath value.
2
10 seconds—The ETCO
2
moving window over a 10-second period.
20 seconds—The ETCO
2
moving window over a 20-second period.
O correction is off, only oxygen cor-
2
O correction to the CO
2
and IMCO
numerics display the highest/lowest value within a
2
and IMCO
numerics display the highest/lowest value within a
2
value is made. In this case,
2
and N
O (operating room condi-
2
2
.
2
Introduction to the Instrument
Data
2
2

Advertisement

Table of Contents

   Also See for Philips M3001A

This manual is also suitable for:

M3000aM3046aM3015aM3016a

Comments to this Manuals

Symbols: 0
Latest comments: