Sidestream Co 2 Features - Philips M3001A Service Manual

Sidestream CO
This illustration shows the user controls on the Server and the connector for appropriate
tubing for the sidestream CO
Sidestream CO
The two calibration marks are located at 10% and 60% of wave channel height. The lower
calibration mark is labelled 0 mmHg (0.0 kPa) on all scales. The upper one is adjustable from
20 mmHg (2kPa) to 100 mmHg (13 kPa) in steps of 10 mmHg (1kPa).
CO
Measurement Mode
In the measurement mode, the Extension continuously measures CO
calculates medical parameters and exchanges information with the Server via FELP.
• N
rection to CO
and N
If N
it is assumed that the gas mixture consists mainly of O
tions).
Introduction to the Instrument
Features
2
2
Wave
2
2
40
0
O Correction—This can be turned on or off. If N
2
is made. In this case, it is assumed that the gas mixture consists mainly of O
2
(respiratory intensive care unit conditions).
2
O correction is on, oxygen and N
2
measurement on the Extension.
Connector for
sidestream CO
tubing.
O correction is off, only oxygen cor-
2
O correction to the CO
2
2
Sidestream CO Measurement
2
2
concentration,
2
value is made. In this case,
2
and N O (operating room condi-
2
2
49