Download  Print this page

Attached To A Universal Pole Clamp - Philips M3001A Service Manual

M3/m4 monitors,measurement server,measurement server extensions.
Hide thumbs


Installing the Tilt/Swivel Mount (M3080A #A14)

Attached to a Universal Pole Clamp

This option is used to attach the Tilt/Swivel mount to a Universal Pole clamp. The Monitor
can then be mounted on a pole or rail and can provide tilt and swivel capability.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Hang the bed hanger over the rail.
Unpack the Tilt/Swivel mount and check all parts are available.
Remove the adapter plate (this is only necessary for the GCX Wall Channel).
Secure the rail to the Tilt/Swivel mount with the 2 screws provided.
Decide whether the tilt/swivel mounting is to be secured for vertical positioning (on
a pole) or for horizontal positioning (on a rail).
Secure the pole clamp to the tilt/swivel mounting with the two screws provided.
Tighten the screws.
Attach the clamp to a pole or rail.
Use adjustment knobs to adjust to the required tilt/swivel angle.
Installing the Instrument


Table of Contents

   Also See for Philips M3001A

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: