Philips M3001A Service Manual page 24

A Quick Description of the Measurement Server
M3001A Connectors and Keys
White ECG/Resp connector.
1
2 Blue SpO connector
2
Red NBP connector
3
4 & Combined pressure (red) and temperature (brown)
connector - connect either invasive pressure
5
transducer or temperature probe (M3000A #C06;
M3001A #C06 and #C18 only).
Press and temp cannot be used at the same time.
You might have a version of the Measurement Server
that does not have this connector.
8
NBP Start/Stop key - starts or stops NBP
6
measurements.
7 Either:
NBP STAT key - starts NBP STAT series of
measurements.
or
Zero key - initiates a zero procedure for the
connected pressure transducer when pressed and held
for a second.
Alarm Silence/Reset
8
9 MSL cable connector to the monitor.
Introduction to the Instrument