Philips M3001A Service Manual page 102

Installation of Wireless Infrastructure
If the Read-only attribute has not been removed from the configuration tool files, the
following error message will be displayed.
•
If the serial cable connecting the configuring PC to the device or the PC's COM port is
inaccessible or not working, one of the following windows will be displayed:
• Check the serial cable and its connections carefully to assure that a good interconnection is
being made
• Ensure that no other applications in the configuring PC have control of its Serial Port (e.g.
Hyperterminal). Close all other applications.
• Ensure that the proper COM port is selected in the Configuration Tool window.
If configuring a Wireless Adapter:
Turn the Wireless M3/M4 Monitor Off and then On and ensure that it passes its self-test.
Restart the Configuration Tool and try the procedure again.
86
Click OK to exit the tool and remove the Read-only attribute following the procedure
described in Making the Config Files Writeable.
For Wireless Adapter
Installing the Instrument