Download  Print this page

Philips M3001A Service Manual Page 105

M3/m4 monitors,measurement server,measurement server extensions.
Hide thumbs

Advertisement

Configuring the Monitor
Figure 1 Systolic readings of NBP Measurement Characteristics for M3 Release B
and M3 Release C compared to readings obtained using the manual auscultatory
method (Korotkoff) and direct arterial measurement.
Figure 2 Diastolic readings of NBP Measurement Characteristics for M3 Release B
and M3 Release C compared to readings obtained using the manual auscultatory
method (Korotkoff) and direct arterial measurement.
The data for Figure 1 and Figure 2 was derived from M3 Clinical Evaluations and
"Auscultatory Measurement of Arterial Pressure During Anesthesia: a Reassessment of
Korotkoff Sounds", E. Pereira et al., European Journal of Anesthesiology 1985, 2, II-20.
The setting of NBP Measurement Characteristic is stored in the Measurement Server. If the
Measurement server is moved between monitors the setting will travel with the Measurement
Server.
Installing the Instrument
89

Advertisement

Table of Contents

   Also See for Philips M3001A

This manual is also suitable for:

M3000aM3046aM3015aM3016a

Comments to this Manuals

Symbols: 0
Latest comments: