Download  Print this page

Non-invasive Blood Pressure (nbp) Measurement; Description; Measurements; Nbp Features - Philips M3001A Service Manual

M3/m4 monitors,measurement server,measurement server extensions.
Hide thumbs

Advertisement

Non-invasive Blood Pressure (NBP) Measurement

Description

The Measurement Server has a non-invasive blood pressure measurement for the Monitor
monitoring device. It is designed to be used with adult, paediatric, or neonatal patients, in
ICU and OR environments.

Measurements

The measurement produces numerics for the systolic, diastolic, and mean blood pressure
values. No wave is associated with this measurement.
Three different methods can be used to obtain the measurements, as follows:
• Manual—For each request, one measurement of systolic, diastolic, and mean pressures is
taken.
• Auto—Repeated measurements of the three values are taken at timed intervals specified by
the user.
• Stat—Measurements of the three values are taken immediately and repeatedly over a
period of five minutes. This method uses a faster measurement procedure but produces a
less accurate reading.

NBP Features

This illustration shows the user controls and connector for the measurements. The parts are
described in the paragraphs following the illustration.
Introduction to the Instrument
Non-invasive Blood Pressure (NBP) Measurement
Start/Stop/Stat Key:
A single-press key, used to start
or stop a manual measurement,
or start an automatic measurement cycle.
A standard NBP connector
connects to the cuff.
29

Advertisement

Table of Contents

   Also See for Philips M3001A

This manual is also suitable for:

M3000aM3046aM3015aM3016a

Comments to this Manuals

Symbols: 0
Latest comments: