Download  Print this page

How To Access The Monitor And Server Revision Screen - Philips M3001A Service Manual

M3/m4 monitors,measurement server,measurement server extensions.
Hide thumbs


NBP Cycles: (information only)
The cumulative number of NBP cycles completed is shown, but cannot be modified.
Line Frequency
When operating on mains power supply, the line frequency indication is used to switch
between 50 Hz and 60 Hz for the ECG filtering frequency.
Make sure that the Line Frequency is set correctly for the country option ordered. The factory
default is 60 Hz for all units regardless of country option.

How To Access the Monitor and Server Revision Screen

Troubleshooting the Instrument
Press Setup.
Move the highlight to Revision.
Depending on which screen you want to display, toggle between Monitor Revision and
MeasServ Revision.
Using Service Mode


Table of Contents

   Also See for Philips M3001A

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: