Download  Print this page

Installing The Universal Bed Hanger (m3080a #a11) - Philips M3001A Service Manual

M3/m4 monitors,measurement server,measurement server extensions.
Hide thumbs

Advertisement

Installing the Universal Bed Hanger (M3080A #A11)

The hanging mount is used for hanging the Monitor on the bed footboard/headboard or a rail.
It is delivered ready-to-use and does not require installing.
Step 1
Step 2
Step 3
Step 4
Step 5
The Monitor snap-fits onto the plate. To release the Monitor, press the button on the front of
the plate.
Installing the Instrument
Unpack the Bed Hanger and check all parts are available.
Rotate the arms to their open position.
Hang the hanger on the rail (or as appropriate).
If necessary, adjust the bed hanger to a vertical position by pulling out the slider at
the rear of the hanger.
If necessary, fix the bed hanger by hooking the rubber strap around a vertical bar (as
shown in the insert).
Installing the Universal Bed Hanger (M3080A #A11)
Slider
99

Advertisement

Table of Contents

   Also See for Philips M3001A

This manual is also suitable for:

M3000aM3046aM3015aM3016a

Comments to this Manuals

Symbols: 0
Latest comments: