Download  Print this page

With The Measurement Server Separate From The Monitor - Philips M3001A Service Manual

M3/m4 monitors,measurement server,measurement server extensions.
Hide thumbs

Advertisement

...with the Measurement Server Separate from the Monitor

You can connect the Measurement Server to the Monitor using a server link cable (MSL) as
follows:
Step 1
Step 2
Step 3
Installing the Instrument
You can connect the cable to the plug on the link bar, or directly to the Monitor as
follows:
Latch
Link Bar
To remove the link bar,
a. Turn the latch guard away from the edge of the latch.
b. Unlatch the link bar from the back of the Monitor.
c. Slide the link bar away from the Monitor.
Attach the socket end of the cable to the Monitor.
Attach the other end of the cable to the Measurement Server or, if present, the
M3015A/M3016A Measurement Server Extension.
Connecting the Measurement Server...
73

Advertisement

Table of Contents

   Also See for Philips M3001A

This manual is also suitable for:

M3000aM3046aM3015aM3016a

Comments to this Manuals

Symbols: 0
Latest comments: