Download  Print this page

Philips M3001A Service Manual Page 130

M3/m4 monitors,measurement server,measurement server extensions.
Hide thumbs

Advertisement

MSL Cable Termination
Step 5
Step 6
NOTE
US version only: Fasten the rectangular wall-mounting plate to the wall. Attach the mounting
flange to the wall-mounting plate.
Step 7
Step 8
Step 9
114
Slide the PCB back on to the metallic mounting flange.
Use screws to fasten the mounting flange to the wall.
Mount the plastic cover. The plastic cover consists of two pieces:
Frame
Angled cover
Put the frame over the mounting insert and the PCB. Place the angled cover on top
and fasten with two screws.
Connect the monitor and the measurement server to the wall installation.
Perform the following tests as described in the "Testing the Instrument" section of
this manual:
Power-on test blocks
Safety test blocks
ECG Sync Performance Test
Installing the Instrument

Advertisement

Table of Contents

   Also See for Philips M3001A

This manual is also suitable for:

M3000aM3046aM3015aM3016a

Comments to this Manuals

Symbols: 0
Latest comments: