Download  Print this page

Philips M3001A Service Manual Page 214

M3/m4 monitors,measurement server,measurement server extensions.
Hide thumbs

Advertisement

Part 3 Using Support Functions
The following table explains the contents of the Status Log. The first entry on the left side of
the Status Log corresponds to the top entry under Field Title in the table.
H, C, or N
Device ID Code
n
Error Code
Date/Time
198
Field Title
H and C—These denote fatal errors which
have caused a Hot start (like switching the
Instrument off/on) or a Cold start (like per-
forming a System Test).
N—This denotes a non-fatal error.
This number refers to a software module, and
is used to indicate the location of a fault.
This number is the internal software module
number.
This number describes the type of fault identi-
fied.
This indicates the date/time the error occurred.
Description
Troubleshooting the Instrument

Advertisement

Table of Contents

   Also See for Philips M3001A

This manual is also suitable for:

M3000aM3046aM3015aM3016a

Comments to this Manuals

Symbols: 0
Latest comments: