Download  Print this page

Tutorial For Repairing The Instrument - Philips M3001A Service Manual

M3/m4 monitors,measurement server,measurement server extensions.
Hide thumbs


Tutorial for Repairing the Instrument

Question 1: What must be kept open when inserting the Monitor chassis?
Question 2: Which of the following are correct statements according to the warnings,
cautions and safety procedures in this chapter?
Question 3: What must be removed to access the fuse?
Repairing the Instrument
a. When inserting the chassis, the Monitor Bezel and the link bar must not be kept
b. When inserting the chassis, the LCD assembly must be open and the backlight
tubes must be exposed.
c. When inserting the chassis, always open the battery compartment door to avoid
striking the door clip.
a. Do not perform any disassembly procedures other than Server and Extension
removal with power applied to the Instrument.
b. High voltages are present on the Power Supply board for up to 20 seconds after
disconnecting the mains power cord.
c. Never insert a battery without the Power Supply board being present.
d. All of the above are correct according to this. chapter.
a. When accessing the fuse, all Instrument assemblies must be removed.
b. When accessing the fuse, the Server, the Extension, the battery, and the Power
Supply must be removed.
c. When accessing the fuse, the battery compartment cover and the battery must be
Tutorial for Repairing the Instrument


Table of Contents

   Also See for Philips M3001A

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: