Philips M3001A Service Manual page 99

Step 10 Unsnap the gray cover on the upper right side of the M3/M4 Monitor housing to
Step 11 Connect the phono plug end of the 9-Pin D female - 1/8 in. male Stereo Phono cable
Step 12 Turn ON the M3/M4 Monitor and insure that it passes its self-test.
Step 13 Select the WB_WirelessM3_1-2b15.cfg item in the drop down list in the
Installing the Instrument
expose the female stereo phono plug on the Wireless Adapter, as shown in the next
figure:
Stereo
Phono
Plug
into the phono plug connector on the Wireless Adapter as shown above and the 9-
pin D end of the cable into the 9-Pin D Serial Port connector on the configuring PC.
Configuration Tool window.
Installation of Wireless Infrastructure
83