Mounted to the GCX Wall Channel (M3080A #A15)
This option is used to mount the Monitor to a GCX Wall Channel but to also provide tilt and
Hang the bed hanger over the rail.
Installing the Instrument
Unpack the Tilt/Swivel mount and check all parts are available.
Make sure the wall channel end-stop has been fitted.
Secure the rail to the Tilt/Swivel mount with the 2 screws provided.
Slide the adapter plate down the wall channel.
Adjust the assembly to the correct height with the adjustable channel stop.
Use adjustment knobs to adjust to the required tilt/swivel angle.
Installing the Tilt/Swivel Mount (M3080A #A14)