The following cable is required to interconnect the configuring PC to the Wireless LAN
adapter in the M3/M4 patient monitor:
• 9-pin D female - 1/8 in. male stereo phono cable (PN M1360-61675)
Copying the Configuration Tools to the Configuring PC
The first step in the procedure is to copy the configuration tool software from the IntelliVue
Information Center Application Software CD ROM to the configuring PC.
Step 1
Step 2
Step 3
Step 4
NOTE
The Viridia\tools\ConfigTool directory file is less than 1.4 Mb so it can be stored on a 1.4
Mb floppy disk for later use, or for transfer to a PC without a CD ROM drive.
Installing the Instrument
Turn on the configuring PC to display the Windows Main Menu.
Insert the IntelliVue Information Center Application Software CD ROM
into the CD ROM drive of the configuring PC.
Open Windows Explorer as follows:
a. Click on Start in the lower left of the Windows Main Menu to open the
Windows Workstation menu.
b. Click Programs to display the Programs menu.
c. Click Windows Explorer to display folders in the PCs CD ROM drive.
Find the Viridia directory on the CD ROM shown in the figure below and click on
it to display the tools directory.
Viridia
Copy the Viridia\tools\ConfigTool directory to the drive on the configuring PC
to be used for storing this program as follows:
a. Open the directory to be used on the configuring PC
b. Click on, hold, and drag the Viridia\tools\ConfigTool directory to the open PC
directory
Installation of Wireless Infrastructure
79