Download  Print this page

M3001a Measurement Server Extended Measurements Packages; M3000a Measurement Server Standard Package; M3000a #c06 Measurement Server Extended Measurements Package; Features - Philips M3001A Service Manual

M3/m4 monitors,measurement server,measurement server extensions.
Hide thumbs


Section 2 - Measurement Server Description and Features

M3001A Measurement Server Extended Measurements Packages

All versions of the M3001A Measurement Server offer EASI lead placement using an EASI
5-electrode cable set. The conventional 12-lead ECG capability of M3001A #C12 and #C18
only works with the IntelliVue family of monitors. You can connect a 10-electrode lead set
(for example, if a patient is transferred from an IntelliVue monitor), but only the standard five
electrodes (RA, LA, RL, LL, and V) are used for monitoring. The rest are automatically
M3001A #C06:
• Standard package plus Press and Temp.
M3001A #C12:
• As standard package for M3/M4. Conventional 12-Lead ECG when used with IntelliVue.
M3001A #C18:
• As standard package plus Press, Temp for M3/M4. Conventional 12-Lead ECG when used
with IntelliVue.

M3000A Measurement Server Standard Package

The Measurement Server (M3000A) standard package includes:
• Measurements of ECG/Resp, NBP, and SpO
• Signal and alarm processing.
M3000A #C06 Measurement Server Extended Measurements
The Measurement Server (M3000A #C06) optional package includes:
• Measurements of ECG/Resp, NBP, SpO
• Signal and alarm processing.


The Measurement Server has the following general features:
Data Management
The Measurement Server features Patient Data Management. This consists of continuous 4-
hour storage of patient-related measurement information. This allows you to do the
• Manage patient information,
• View patient data in tabular form via the Monitor,
• Print patient information reports via the Monitor,
, Press, and Temp,
Introduction to the Instrument


Table of Contents

   Also See for Philips M3001A

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: