Software Upgrades - Tektronix WVR8200 User Manual

Functions

Software upgrades

Before you begin
114
8. In the same submenu, navigate to the Preset Group that matches the source
Preset Group and press the SEL button.
9. Press the left arrow key and then the down arrow key and highlight Copy.
10. Press the SEL button. You should see a pop-up notice that says Export
Complete.
11. If you do not want to export any other presets at this time, press the Preset
button to dismiss the menu.
12. Remove the USB memory device from the USB drive.
You do not need to perform the software upgrade if your instrument has the latest
version of software installed. Perform the following steps to determine if the
software on your instrument needs to be upgraded:
1. Power on the instrument.
2. Verify the current software version installed on the instrument:
a. Press the CONFIG button on the front panel.
b. Navigate to Utilities > View HW/SW Version.
c. In the Hardware and Software Versions display window, note the software
version number of the instrument.
Instrument Software version number
3. Verify the latest version of software at the Tektronix Web site:
a. Use the Web browser on a PC to navigate to the following Tektronix Web
site:
http://www.tektronix.com/downloads
b. On the Downloads Finder Web page, search by model number (such
as WVR8300) and filter by software and software type to locate the
software-upgrade package for the instrument.
c. Note the latest version number of the software-upgrade package(s).
Web site Software version number
4. If the latest software version at the Web site is newer than the version on your
instrument, you need to upgrade the software.
WVR8200 and WVR8300 User Manual