About This Guide; Taking Out What You Need - Cisco Catalyst 3560 Getting Started Manual

Hide thumbs Also See for Catalyst 3560:
Table of Contents

Advertisement

1

About this Guide

This guide provides instructions on how to use Express Setup to configure your switch. It also includes information about switch
management options, basic rack-mounting procedures, port and module connections, power connection procedures, and
troubleshooting help.
For additional installation and configuration information for Catalyst 3560 switches, see the Catalyst 3560 documentation on
Cisco.com. For system requirements, important notes, limitations, open and resolved bugs, and last-minute documentation
updates, see the release notes, also on Cisco.com.
When you use the online publications, refer to the documents that match the Cisco IOS software version running on the switch.
The software version is on the Cisco IOS label on the switch rear panel.
For translations of the warnings that appear in this publication, see the Regulatory Compliance and Safety Information for the
Catalyst 3560 Switch guide.
2

Taking Out What You Need

1. Unpack and remove the switch and the accessory kit from the shipping box.
2. Return the packing material to the shipping container, and save it for future use.
3. Verify that you have received the items shown on page 3. If any item is missing or damaged, contact your Cisco
representative or reseller for instructions. Some switch models might include additional items, and you might need to supply
or to order some optional items.
Equipment That You Supply to Run Express Setup
You need to supply this equipment:
• PC
• Ethernet (Category 5) straight-through cable (as shown)
2

Advertisement

Table of Contents
loading

Table of Contents