1-1] Slot-Lco Port-Port Command - Panasonic KX-TDA50 Programming Manual

Feature Manual References
1.6.2 Flash/Recall/Terminate
2.7.12 [1-1] Slot—LCO Port—Port Command
Commands for the LCO ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.12 [1-1] Slot—LCO Port—Port Command
Programming Manual References
2.7.11 [1-1] Slot—LCO Port
Feature Manual References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the
purpose of repair.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.12 [1-1] Slot—LCO Port—Port Command
Programming Manual References
2.7.11 [1-1] Slot—LCO Port
Feature Manual References
None
2.7 [1] Configuration
PC Programming Manual 119