Omron SYSMAC CS1W-SCB41-V1 Operation Manual page 709

Visual Inspection System Protocol
Continuous Measurement Execution (Interrupt) (F300)
(Sequence No. 462 (Hex 01CE))
This sequence carries out continuously setting the F300 and stores measurement results in the specified
words. The interrupt notification method is used for the receive data. The interrupt No. is 102.
Send Data Word Allocation (3rd Operand of PMCR(260))
None.
Receive Data Word Allocation (4th Operand of PMCR(260))
Receive data
storage words
Note 1. Exponential expressions are used for numbers larger than 9999999.999 and smaller than –999999.9.
2. The number of measurement items is up to 5, but only one window number can be read.
680
Number of receive data words
+0
+1 (Undefined) Window No.
+2 (Undefined)
Decimal portion
+3
Integer portion
+4
+5 Sign 0
+6 Decimal portion
Integer portion
+7
+8 Sign 0
Decimal portion
+9
Integer portion
+10
+11
Sign 0
+12 Decimal portion
Integer portion
+13
+14 Sign 0
+15 Decimal portion
Integer portion
+16
+17
Sign 0
Offset Content (data format)
+0 Number of receive data words
(4 digits Hex)
+1 Window No. (2 digits BCD)
+2 Evaluation result (1 digit BCD)
+3 to +5 Measurement value (decimal portion)
(3 digits BCD)
Measurement value (integer portion)
(7 digits BCD)
Measurement value (sign)
(1 digit)
+6 to +8 Same as +3 to +5.
+9 to Same as +3 to +5.
+11
+12 to Same as +3 to +5.
+14
+15 to Same as +3 to +5.
+17
Evaluation
result
Data 1
Data 2
Data 3
Data 4
Data 5
0006: 1 measurement item
0009: 2 measurement items
000C: 3 measurement items
000F: 4 measurement items
0012: 5 measurement items
00 to 07
0: OK
1: NG
Example
–123.456
+3 3456
+4 0012
F000
+5
F is stored for negative values.
Same as +3 to +5.
Same as +3 to +5.
Same as +3 to +5.
Same as +3 to +5.
Appendix O
Data
Example
+123.456
+3 3456
+4 0012
0000
+5